Videod

Leiti 4 vastet.

ID	Kanal	Video	Kuupäev	Kirjeldus	Avalik	HD	URL	TitleMUI_en	TitleMUI_et	KirjeldusMUI_en	KirjeldusMUI_et	Filename	Category	CategoryMUI_en	Tags	OdyseeURL	KanalMUI_en	KanalMUI_et	Translated	has_thumbnail	local_stream	ytdlp_meta	est_subs	eng_subs
636	Press any key to continue...	Flipnic - Free Camera [PCSX2 Cheat Engine Mod]	2025-07-26	In this video, I showcase various areas of the game you normally don't see thanks to a freecam mod I made with Cheat Engine. It's ready to use if you have the PAL version, but other versions require some manual labor to get it working. ---------------------------------------------------- CT file download ---------------------------------------------------- https://gist.github.com/MarkusMaal/bc9b2d7497d67cb1a17e1ad1d61ca0eb/raw/9b3679e61b9aeacc02fc69ffa725bb57f1e0ee11/FlipnicFreecam-public.CT (right click → save as) ---------------------------------------------------- Using Cheat Engine with PCSX2 2.x ---------------------------------------------------- To use Cheat Engine with PCSX2 2.x, you need to enable this setting: Edit → Settings → Scan Settings → Scan the following memory region types → MEM_MAPPED Otherwise, it'll just ignore the PS2 EE memory region. ---------------------------------------------------- Using the CT file ---------------------------------------------------- To load the CT file, choose File → Load in Cheat Engine. Find the file with file browser and open it. Allow it to execute the lua script. Now hook Cheat Engine to PCSX2 with the game already running and keep the address list. You should now see the EEmemPointer has an address - do not remove it! To see the form, double-click Table → FlipnicFreecam. You should see a window open, resize it. Now, in-game, go into a stage and let your ball drop into the outhole (don't relaunch it). Now you have the conditions to control the camera without interruptions. ---------------------------------------------------- Troubleshooting ---------------------------------------------------- Switch back to Flipnic Freecam window and click the "Freecam enable" button. For testing, drag the "Field of view" slider and you should see the FOV change. If you don't see anything change or the game crashes, that means it isn't the PAL version and you need to modify the script to get it to work (for safety reasons, if it didn't crash, restart the game without saving). To see the code, click Table → Show Cheat Table Lua Script. You want to specifically modify the local camLoc variable. Perform the following steps to get the offset: 1. Load the Metallurgy A stage (a 5-minute demo of this stage is immediately accessible even if you don't have a completed save file). You can press START to pause the timer if you only have access to the demo. 2. Let the animation play 3. Using Cheat Engine or PCSX2 debug tools, search for this array of bytes in memory: 4A F0 40 44 00 00 D0 41 BA 18 1D 44 00 00 80 3F 4A 30 47 44 FC FF FF 3F BA D8 16 44 00 00 80 3F 00 00 00 00 00 00 00 00 4. It should return 1 result. If you're using CE, you can set the start to eemem or pcsx2-qt.eemem in memory scan options to ensure only 1 value is returned. 5. Add 0x30 to the address where you found these bytes 6. If you used CE, you also need to also subtract the address of EEmemPointer to get the actual offset in PS2 memory 7. Take the resulting offset and set the camLoc variable to it (hexadecimal values are prefixed with 0x) 8. Save the script and click the "Execute script" button to apply changes immediately ---------------------------------------------------- How to use Flipnic Freecam form ---------------------------------------------------- There are three columns that you can mess with: - Origin+Target - moves both the target and origin, so that you can just move around without changing the angle - Target - moves the "imaginary point", which the camera looks at - Origin - moves the actual camera position without moving the target Also - Freecam enable - Enable Freecam mode (doesn't work when multiball mission is active or in evolution stages) - Freecam disable - Resets the camera to whatever it was There are also three sliders - Field of view - Adjusts FOV, smaller values zoom the camera out, while higher values make everything smaller and more distorted - Substep - Each time you click a + or - button, move the camera by this mu	1	1	https://www.youtube.com/watch?v=31-pnJw6PFo	Flipnic - Free Camera [PCSX2 Cheat Engine Mod]	Flipnic - Free Camera [PCSX2 Cheat Engine Mod]	In this video, I showcase various areas of the game you normally don't see thanks to a freecam mod I made with Cheat Engine. It's ready to use if you have the PAL version, but other versions require some manual labor to get it working. ---------------------------------------------------- CT file download ---------------------------------------------------- https://gist.github.com/MarkusMaal/bc9b2d7497d67cb1a17e1ad1d61ca0eb/raw/9b3679e61b9aeacc02fc69ffa725bb57f1e0ee11/FlipnicFreecam-public.CT (right click → save as) ---------------------------------------------------- Using Cheat Engine with PCSX2 2.x ---------------------------------------------------- To use Cheat Engine with PCSX2 2.x, you need to enable this setting: Edit → Settings → Scan Settings → Scan the following memory region types → MEM_MAPPED Otherwise, it'll just ignore the PS2 EE memory region. ---------------------------------------------------- Using the CT file ---------------------------------------------------- To load the CT file, choose File → Load in Cheat Engine. Find the file with file browser and open it. Allow it to execute the lua script. Now hook Cheat Engine to PCSX2 with the game already running and keep the address list. You should now see the EEmemPointer has an address - do not remove it! To see the form, double-click Table → FlipnicFreecam. You should see a window open, resize it. Now, in-game, go into a stage and let your ball drop into the outhole (don't relaunch it). Now you have the conditions to control the camera without interruptions. ---------------------------------------------------- Troubleshooting ---------------------------------------------------- Switch back to Flipnic Freecam window and click the "Freecam enable" button. For testing, drag the "Field of view" slider and you should see the FOV change. If you don't see anything change or the game crashes, that means it isn't the PAL version and you need to modify the script to get it to work (for safety reasons, if it didn't crash, restart the game without saving). To see the code, click Table → Show Cheat Table Lua Script. You want to specifically modify the local camLoc variable. Perform the following steps to get the offset: 1. Load the Metallurgy A stage (a 5-minute demo of this stage is immediately accessible even if you don't have a completed save file). You can press START to pause the timer if you only have access to the demo. 2. Let the animation play 3. Using Cheat Engine or PCSX2 debug tools, search for this array of bytes in memory: 4A F0 40 44 00 00 D0 41 BA 18 1D 44 00 00 80 3F 4A 30 47 44 FC FF FF 3F BA D8 16 44 00 00 80 3F 00 00 00 00 00 00 00 00 4. It should return 1 result. If you're using CE, you can set the start to eemem or pcsx2-qt.eemem in memory scan options to ensure only 1 value is returned. 5. Add 0x30 to the address where you found these bytes 6. If you used CE, you also need to also subtract the address of EEmemPointer to get the actual offset in PS2 memory 7. Take the resulting offset and set the camLoc variable to it (hexadecimal values are prefixed with 0x) 8. Save the script and click the "Execute script" button to apply changes immediately ---------------------------------------------------- How to use Flipnic Freecam form ---------------------------------------------------- There are three columns that you can mess with: - Origin+Target - moves both the target and origin, so that you can just move around without changing the angle - Target - moves the "imaginary point", which the camera looks at - Origin - moves the actual camera position without moving the target Also - Freecam enable - Enable Freecam mode (doesn't work when multiball mission is active or in evolution stages) - Freecam disable - Resets the camera to whatever it was There are also three sliders - Field of view - Adjusts FOV, smaller values zoom the camera out, while higher values make everything smaller and more distorted - Substep - Each time you click a + or - button, move the camera by this much - Step - Same as substep, but allows you to move even faster Obviously you can click on the - and + buttons, but you can also scroll the mouse wheel on the - buttons to change that specific value. ---------------------------------------------------- Chapters ---------------------------------------------------- 0:00 Biology 9:57 Metallurgy 21:33 Optics 37:09 Biology 2P 42:08 Metallurgy 2P 45:00 Geometry 57:56 Optics 2P 59:01 Geometry 2P ---------------------------------------------------- In case you use macOS ---------------------------------------------------- You need to temporarily disable System Integrity Protection to use Cheat Engine on a Mac. Follow Apple's instructions here: https://developer.apple.com/documentation/security/disabling-and-enabling-system-integrity-protection.	In this video, I showcase various areas of the game you normally don't see thanks to a freecam mod I made with Cheat Engine. It's ready to use if you have the PAL version, but other versions require some manual labor to get it working. ---------------------------------------------------- CT file download ---------------------------------------------------- https://gist.github.com/MarkusMaal/bc9b2d7497d67cb1a17e1ad1d61ca0eb/raw/9b3679e61b9aeacc02fc69ffa725bb57f1e0ee11/FlipnicFreecam-public.CT (right click → save as) ---------------------------------------------------- Using Cheat Engine with PCSX2 2.x ---------------------------------------------------- To use Cheat Engine with PCSX2 2.x, you need to enable this setting: Edit → Settings → Scan Settings → Scan the following memory region types → MEM_MAPPED Otherwise, it'll just ignore the PS2 EE memory region. ---------------------------------------------------- Using the CT file ---------------------------------------------------- To load the CT file, choose File → Load in Cheat Engine. Find the file with file browser and open it. Allow it to execute the lua script. Now hook Cheat Engine to PCSX2 with the game already running and keep the address list. You should now see the EEmemPointer has an address - do not remove it! To see the form, double-click Table → FlipnicFreecam. You should see a window open, resize it. Now, in-game, go into a stage and let your ball drop into the outhole (don't relaunch it). Now you have the conditions to control the camera without interruptions. ---------------------------------------------------- Troubleshooting ---------------------------------------------------- Switch back to Flipnic Freecam window and click the "Freecam enable" button. For testing, drag the "Field of view" slider and you should see the FOV change. If you don't see anything change or the game crashes, that means it isn't the PAL version and you need to modify the script to get it to work (for safety reasons, if it didn't crash, restart the game without saving). To see the code, click Table → Show Cheat Table Lua Script. You want to specifically modify the local camLoc variable. Perform the following steps to get the offset: 1. Load the Metallurgy A stage (a 5-minute demo of this stage is immediately accessible even if you don't have a completed save file). You can press START to pause the timer if you only have access to the demo. 2. Let the animation play 3. Using Cheat Engine or PCSX2 debug tools, search for this array of bytes in memory: 4A F0 40 44 00 00 D0 41 BA 18 1D 44 00 00 80 3F 4A 30 47 44 FC FF FF 3F BA D8 16 44 00 00 80 3F 00 00 00 00 00 00 00 00 4. It should return 1 result. If you're using CE, you can set the start to eemem or pcsx2-qt.eemem in memory scan options to ensure only 1 value is returned. 5. Add 0x30 to the address where you found these bytes 6. If you used CE, you also need to also subtract the address of EEmemPointer to get the actual offset in PS2 memory 7. Take the resulting offset and set the camLoc variable to it (hexadecimal values are prefixed with 0x) 8. Save the script and click the "Execute script" button to apply changes immediately ---------------------------------------------------- How to use Flipnic Freecam form ---------------------------------------------------- There are three columns that you can mess with: - Origin+Target - moves both the target and origin, so that you can just move around without changing the angle - Target - moves the "imaginary point", which the camera looks at - Origin - moves the actual camera position without moving the target Also - Freecam enable - Enable Freecam mode (doesn't work when multiball mission is active or in evolution stages) - Freecam disable - Resets the camera to whatever it was There are also three sliders - Field of view - Adjusts FOV, smaller values zoom the camera out, while higher values make everything smaller and more distorted - Substep - Each time you click a + or - button, move the camera by this much - Step - Same as substep, but allows you to move even faster Obviously you can click on the - and + buttons, but you can also scroll the mouse wheel on the - buttons to change that specific value. ---------------------------------------------------- Chapters ---------------------------------------------------- 0:00 Biology 9:57 Metallurgy 21:33 Optics 37:09 Biology 2P 42:08 Metallurgy 2P 45:00 Geometry 57:56 Optics 2P 59:01 Geometry 2P ---------------------------------------------------- In case you use macOS ---------------------------------------------------- You need to temporarily disable System Integrity Protection to use Cheat Engine on a Mac. Follow Apple's instructions here: https://developer.apple.com/documentation/security/disabling-and-enabling-system-integrity-protection.	FlipnicFreecam.mp4	Videomängude analüüs	Video game analysis	free camera,freecam,mod,cheat,Cheat Engine,PCSX2,2.0,Flipnic,Flipnic: Ultimate Pinball,Flipnic research,Optics,Biology,Geometry,Metallurgy,2 player,PlayStation 2	N/A	Press any key to continue...	Press any key to continue...	0	/channel_db_lite/web/thumbs/636.jpg	N/A	N/A	N/A	N/A
635	Press any key to continue...	Sun Fun ringtone [Voice Enhanced]	2025-07-15	so Adobe has this thing that let's you remove background noise from recordings and it actually sound really good but what if you put an old Nokia ringtone into it? well, you get this...	1	1	https://www.youtube.com/watch?v=awgxhHmGvuw	Sun Fun ringtone [Voice Enhanced]	Sun Fun ringtone [Voice Enhanced]	so Adobe has this thing that let's you remove background noise from recordings and it actually sound really good but what if you put an old Nokia ringtone into it? well, you get this...	so Adobe has this thing that let's you remove background noise from recordings and it actually sound really good but what if you put an old Nokia ringtone into it? well, you get this...	Sun Fun enhanced.wmv	Naljavideod	Joke videos		N/A	Press any key to continue...	Press any key to continue...	0	/channel_db_lite/web/thumbs/635.jpg	N/A	N/A	N/A	N/A
467	Press any key to continue...	Flipnic - Metallurgy A (Hard difficulty gameplay)	2022-07-25	Since I haven't found a lot of good full stage playthrough videos on Flipnic, I've decided to upload some of my own gameplay! As a challenge for myself, I've also cranked up the difficulty to hard, which reduces the number of balls to three with no continues (unless you get extra credits and balls of course), all ball saving bumpers are deactivated by default, and the number of bumper hits required to complete specific missions has also been increased. This time it's Metallurgy A, which is unlocked after defeating the first boss. At the minimum, to complete this stage, you have to do the following: 1. Go through the first lane after spawning on the stage 2. Take a color coded lane 3. If you chose the magenta lane, you'll end up in an area with a UFO trying to shoot lasers at you. Try to hit the purple circuit board certain number of times, which will complete the first "Move On" mission 4. Take the lane, which you just uncovered after completing this mission 5. You'll now be at another area. Try to hit another purple circuit board certain number of times, which will complete the second "Move On" mission 6. Take the lane, which you just uncovered 7. Go through the non-colorcoded lanes until you find a color-coded lane, which you haven't taken 8. If you chose the green lane, you'll end up in the air spinning around cylinders. If you press circle, you'll move forward in that direction 9. Take a specific path until you get to an area with four shafts. Hit one shaft while it's active to start a "Shut Down the Shafts" mission 10. Shut down all shafts within the time limit 11. Repeat steps 9-10 12. You can go back to the lane selection area if you go through a portal 13. Repeat step 7 14. If you chose the blue lane, you'll end up in another area, where a giant spider crab mini-boss spawns. If you hit the spider crab with the ball, you'll remove some of its health. Try to do this until the spider crab explodes. Then you can take a specific lane to go back 15. Take the non-colorcoded lanes until you get back to the spawn area. 16. Take the white lane, that was previously covered by a pillar before. This will start he "Zero gravity" mission 17. (Optional) Try to hit projectiles within the time limit. Second to last particle shape is a stick figure and the final one is a combination of all the previous shapes. If you manage to do this, you'll be awarded with a neat cake cutscene and a bunch of bonus points. If you don't, you'll just recieve no bonus and the cutscene won't play, but you'll still unlock the next stage 18. (Optional) You'll now be teleported back to spawn. You can now complete any leftover yellow missions that you hadn't completed before, which allows you to maximize the score, before playing the next stage (after quitting the stage, the score gets locked, meaning you won't get any more points)	1	1	https://www.youtube.com/watch?v=pftgH8DNink	.	.	Since I haven't found a lot of good full stage playthrough videos on Flipnic, I've decided to upload some of my own gameplay! As a challenge for myself, I've also cranked up the difficulty to hard, which reduces the number of balls to three with no continues (unless you get extra credits and balls of course), all ball saving bumpers are deactivated by default, and the number of bumper hits required to complete specific missions has also been increased. This time it's Metallurgy A, which is unlocked after defeating the first boss. At the minimum, to complete this stage, you have to do the following: 1. Go through the first lane after spawning on the stage 2. Take a color coded lane 3. If you chose the magenta lane, you'll end up in an area with a UFO trying to shoot lasers at you. Try to hit the purple circuit board certain number of times, which will complete the first "Move On" mission 4. Take the lane, which you just uncovered after completing this mission 5. You'll now be at another area. Try to hit another purple circuit board certain number of times, which will complete the second "Move On" mission 6. Take the lane, which you just uncovered 7. Go through the non-colorcoded lanes until you find a color-coded lane, which you haven't taken 8. If you chose the green lane, you'll end up in the air spinning around cylinders. If you press circle, you'll move forward in that direction 9. Take a specific path until you get to an area with four shafts. Hit one shaft while it's active to start a "Shut Down the Shafts" mission 10. Shut down all shafts within the time limit 11. Repeat steps 9-10 12. You can go back to the lane selection area if you go through a portal 13. Repeat step 7 14. If you chose the blue lane, you'll end up in another area, where a giant spider crab mini-boss spawns. If you hit the spider crab with the ball, you'll remove some of its health. Try to do this until the spider crab explodes. Then you can take a specific lane to go back 15. Take the non-colorcoded lanes until you get back to the spawn area. 16. Take the white lane, that was previously covered by a pillar before. This will start he "Zero gravity" mission 17. (Optional) Try to hit projectiles within the time limit. Second to last particle shape is a stick figure and the final one is a combination of all the previous shapes. If you manage to do this, you'll be awarded with a neat cake cutscene and a bunch of bonus points. If you don't, you'll just recieve no bonus and the cutscene won't play, but you'll still unlock the next stage 18. (Optional) You'll now be teleported back to spawn. You can now complete any leftover yellow missions that you hadn't completed before, which allows you to maximize the score, before playing the next stage (after quitting the stage, the score gets locked, meaning you won't get any more points)	.	MetallurgyA_hard.mp4	Teised skriptimiskeeled	Other gameplay videos		N/A	Press any key to continue...	Press any key to continue...	1	/channel_db_lite/web/thumbs/467.jpg	N/A	/channel_db_lite/web/json/467.json	N/A	N/A
313	Press any key to continue...	I wonder if YouTube takes down this dumb video	2020-06-30	Whatever you do, PLEASE DO NOT watch this video with your eyes closed. Also, this video IS 13+ ONLY (parental guidance may be required with 13-15 year old audiences). This is an edit of Flipnic's help video, but anything that doesn't talk about balls is removed. I got bored at some point and stopped making the video.	0	0	https://www.youtube.com/watch?v=kAWTbwuTFrM	.	.	Whatever you do, PLEASE DO NOT watch this video with your eyes closed. Also, this video IS 13+ ONLY (parental guidance may be required with 13-15 year old audiences). This is an edit of Flipnic's help video, but anything that doesn't talk about balls is removed. I got bored at some point and stopped making the video.	.	balls.wmv	Naljavideod	Joke videos	YouTube poop,parody,YTP,edit,help	N/A	Press any key to continue...	Press any key to continue...	1	/channel_db_lite/web/thumbs/313.jpg	N/A	/channel_db_lite/web/json/313.json	N/A	N/A