Leiti 11 vastet.

ID Kanal Video Kustutatud Kuupäev Kirjeldus Subtiitrid Avalik Ülekanne HD URL PRIVATE TitleMUI_en TitleMUI_et KirjeldusMUI_en KirjeldusMUI_et Filename Category CategoryMUI_en Tags OdyseeURL KanalMUI_en KanalMUI_et Translated has_thumbnail local_stream ytdlp_meta est_subs eng_subs
644 Press any key to continue... Flipnic - Original Soundtrack [MIDI Waveform Deconstruction] 0 2025-09-12 In this video, I'm showing a waveform deconstruction of the 16 MIDI channels for the game's soundtrack as well as a keyboard showing the keys that are being held down.

This is not just an audio recording, this is my attempt to properly rip the soundtrack. There are a few inaccuracies, specifically related to looping and envelopes.

Soundbank converted to SF2 with a pre-release version of this tool: https://github.com/MarkusMaal/FlipnicFileTools

Chapters:
0:00 Biology - Main Theme (NATURE_0.MID)
2:20 Biology - Watch Out! (NATURE_1.MID)
5:17 Biology - Multiball (NATURE_2.MID)
6:17 Biology - Slot Chance (POSITIVE.MID)
8:00 Evolution/Theology - Main Theme (BOSS_1.MID)
9:46 Metallurgy - Main Theme (ISEKI_0.MID)
12:17 Metallurgy - Spider Crab & Shoot Down The Shafts (ISEKI_1.MID)
13:43 Metallurgy - Multiball (ISEKI_2.MID)
15:06 Optics - Main Theme (HIKARI_0.MID)
17:05 Optics - Bumper Village & Non-Stop Area (HIKARI_1.MID)
18:35 Optics - Multiball & Loop The Loop (HIKARI_2.MID)
20:04 Zero Gravity (SERIOUS.MID)
21:32 Geometry - Main Theme (LOAD_RETRO_3.MID)
22:17 Geometry - Chu Chu Multiball (LOAD_RETRO_4.MID)
22:49 Geometry - Alien Hill (LOAD_RETRO_5.MID)
23:27 Geometry - Area 74 (LOAD_RETRO_6.MID)
24:13 Geometry - Galaxy Tennis (LOAD_RETRO_7.MID)
25:09 Menu Theme (MENU_1.MID)
26:08 Geometry - Triple Paddle (RETRO_0.MID)
27:30 Staff Roll 1 (RETRO_1.MID)
28:35 Intermissions - Wonderful (LOAD_0.MID)
28:45 Intermissions - Ready (LOAD_1.MID)
28:51 Intermissions - Warning (LOAD_1.MID)
28:57 Intermissions - Unused Geometry Wonderful (LOAD_RETRO_0.MID)
29:04 Intermissions - Geometry Ready (LOAD_RETRO_1.MID)
29:11 Intermissions - Geometry Warning (LOAD_RETRO_2.MID)
0 1 0 1 https://www.youtube.com/watch?v=DTtTDvUCvBE 0 Flipnic - Original Soundtrack [MIDI Waveform Deconstruction] Flipnic - Original Soundtrack [MIDI Waveform Deconstruction] In this video, I'm showing a waveform deconstruction of the 16 MIDI channels for the game's soundtrack as well as a keyboard showing the keys that are being held down.

This is not just an audio recording, this is my attempt to properly rip the soundtrack. There are a few inaccuracies, specifically related to looping and envelopes.

Soundbank converted to SF2 with a pre-release version of this tool: https://github.com/MarkusMaal/FlipnicFileTools

Chapters:
0:00 Biology - Main Theme (NATURE_0.MID)
2:20 Biology - Watch Out! (NATURE_1.MID)
5:17 Biology - Multiball (NATURE_2.MID)
6:17 Biology - Slot Chance (POSITIVE.MID)
8:00 Evolution/Theology - Main Theme (BOSS_1.MID)
9:46 Metallurgy - Main Theme (ISEKI_0.MID)
12:17 Metallurgy - Spider Crab & Shoot Down The Shafts (ISEKI_1.MID)
13:43 Metallurgy - Multiball (ISEKI_2.MID)
15:06 Optics - Main Theme (HIKARI_0.MID)
17:05 Optics - Bumper Village & Non-Stop Area (HIKARI_1.MID)
18:35 Optics - Multiball & Loop The Loop (HIKARI_2.MID)
20:04 Zero Gravity (SERIOUS.MID)
21:32 Geometry - Main Theme (LOAD_RETRO_3.MID)
22:17 Geometry - Chu Chu Multiball (LOAD_RETRO_4.MID)
22:49 Geometry - Alien Hill (LOAD_RETRO_5.MID)
23:27 Geometry - Area 74 (LOAD_RETRO_6.MID)
24:13 Geometry - Galaxy Tennis (LOAD_RETRO_7.MID)
25:09 Menu Theme (MENU_1.MID)
26:08 Geometry - Triple Paddle (RETRO_0.MID)
27:30 Staff Roll 1 (RETRO_1.MID)
28:35 Intermissions - Wonderful (LOAD_0.MID)
28:45 Intermissions - Ready (LOAD_1.MID)
28:51 Intermissions - Warning (LOAD_1.MID)
28:57 Intermissions - Unused Geometry Wonderful (LOAD_RETRO_0.MID)
29:04 Intermissions - Geometry Ready (LOAD_RETRO_1.MID)
29:11 Intermissions - Geometry Warning (LOAD_RETRO_2.MID)
In this video, I'm showing a waveform deconstruction of the 16 MIDI channels for the game's soundtrack as well as a keyboard showing the keys that are being held down.

This is not just an audio recording, this is my attempt to properly rip the soundtrack. There are a few inaccuracies, specifically related to looping and envelopes.

Soundbank converted to SF2 with a pre-release version of this tool: https://github.com/MarkusMaal/FlipnicFileTools

Chapters:
0:00 Biology - Main Theme (NATURE_0.MID)
2:20 Biology - Watch Out! (NATURE_1.MID)
5:17 Biology - Multiball (NATURE_2.MID)
6:17 Biology - Slot Chance (POSITIVE.MID)
8:00 Evolution/Theology - Main Theme (BOSS_1.MID)
9:46 Metallurgy - Main Theme (ISEKI_0.MID)
12:17 Metallurgy - Spider Crab & Shoot Down The Shafts (ISEKI_1.MID)
13:43 Metallurgy - Multiball (ISEKI_2.MID)
15:06 Optics - Main Theme (HIKARI_0.MID)
17:05 Optics - Bumper Village & Non-Stop Area (HIKARI_1.MID)
18:35 Optics - Multiball & Loop The Loop (HIKARI_2.MID)
20:04 Zero Gravity (SERIOUS.MID)
21:32 Geometry - Main Theme (LOAD_RETRO_3.MID)
22:17 Geometry - Chu Chu Multiball (LOAD_RETRO_4.MID)
22:49 Geometry - Alien Hill (LOAD_RETRO_5.MID)
23:27 Geometry - Area 74 (LOAD_RETRO_6.MID)
24:13 Geometry - Galaxy Tennis (LOAD_RETRO_7.MID)
25:09 Menu Theme (MENU_1.MID)
26:08 Geometry - Triple Paddle (RETRO_0.MID)
27:30 Staff Roll 1 (RETRO_1.MID)
28:35 Intermissions - Wonderful (LOAD_0.MID)
28:45 Intermissions - Ready (LOAD_1.MID)
28:51 Intermissions - Warning (LOAD_1.MID)
28:57 Intermissions - Unused Geometry Wonderful (LOAD_RETRO_0.MID)
29:04 Intermissions - Geometry Ready (LOAD_RETRO_1.MID)
29:11 Intermissions - Geometry Warning (LOAD_RETRO_2.MID)
FlipnicSequences.mov Muusika Music N/A Press any key to continue... Press any key to continue... 0 /channel_db_lite/web/thumbs/644.jpg N/A N/A N/A N/A
636 Press any key to continue... Flipnic - Free Camera [PCSX2 Cheat Engine Mod] 0 2025-07-26 In this video, I showcase various areas of the game you normally don't see thanks to a freecam mod I made with Cheat Engine. It's ready to use if you have the PAL version, but other versions require some manual labor to get it working.

----------------------------------------------------
CT file download
----------------------------------------------------

https://gist.github.com/MarkusMaal/bc9b2d7497d67cb1a17e1ad1d61ca0eb/raw/9b3679e61b9aeacc02fc69ffa725bb57f1e0ee11/FlipnicFreecam-public.CT (right click → save as)

----------------------------------------------------
Using Cheat Engine with PCSX2 2.x
----------------------------------------------------

To use Cheat Engine with PCSX2 2.x, you need to enable this setting:

Edit → Settings → Scan Settings → Scan the following memory region types → MEM_MAPPED

Otherwise, it'll just ignore the PS2 EE memory region.

----------------------------------------------------
Using the CT file
----------------------------------------------------

To load the CT file, choose File → Load in Cheat Engine. Find the file with file browser and open it. Allow it to execute the lua script. Now hook Cheat Engine to PCSX2 with the game already running and keep the address list. You should now see the EEmemPointer has an address - do not remove it!

To see the form, double-click Table → FlipnicFreecam. You should see a window open, resize it. Now, in-game, go into a stage and let your ball drop into the outhole (don't relaunch it). Now you have the conditions to control the camera without interruptions.

----------------------------------------------------
Troubleshooting
----------------------------------------------------

Switch back to Flipnic Freecam window and click the "Freecam enable" button. For testing, drag the "Field of view" slider and you should see the FOV change. If you don't see anything change or the game crashes, that means it isn't the PAL version and you need to modify the script to get it to work (for safety reasons, if it didn't crash, restart the game without saving).

To see the code, click Table → Show Cheat Table Lua Script. You want to specifically modify the local camLoc variable. Perform the following steps to get the offset:

1. Load the Metallurgy A stage (a 5-minute demo of this stage is immediately accessible even if you don't have a completed save file). You can press START to pause the timer if you only have access to the demo.
2. Let the animation play
3. Using Cheat Engine or PCSX2 debug tools, search for this array of bytes in memory: 4A F0 40 44 00 00 D0 41 BA 18 1D 44 00 00 80 3F 4A 30 47 44 FC FF FF 3F BA D8 16 44 00 00 80 3F 00 00 00 00 00 00 00 00
4. It should return 1 result. If you're using CE, you can set the start to eemem or pcsx2-qt.eemem in memory scan options to ensure only 1 value is returned.
5. Add 0x30 to the address where you found these bytes
6. If you used CE, you also need to also subtract the address of EEmemPointer to get the actual offset in PS2 memory
7. Take the resulting offset and set the camLoc variable to it (hexadecimal values are prefixed with 0x)
8. Save the script and click the "Execute script" button to apply changes immediately

----------------------------------------------------
How to use Flipnic Freecam form
----------------------------------------------------
There are three columns that you can mess with:

- Origin+Target - moves both the target and origin, so that you can just move around without changing the angle
- Target - moves the "imaginary point", which the camera looks at
- Origin - moves the actual camera position without moving the target

Also

- Freecam enable - Enable Freecam mode (doesn't work when multiball mission is active or in evolution stages)
- Freecam disable - Resets the camera to whatever it was

There are also three sliders

- Field of view - Adjusts FOV, smaller values zoom the camera out, while higher values make everything smaller and more distorted
- Substep - Each time you click a + or - button, move the camera by this mu
0 1 0 1 https://www.youtube.com/watch?v=31-pnJw6PFo 0 Flipnic - Free Camera [PCSX2 Cheat Engine Mod] Flipnic - Free Camera [PCSX2 Cheat Engine Mod] In this video, I showcase various areas of the game you normally don't see thanks to a freecam mod I made with Cheat Engine. It's ready to use if you have the PAL version, but other versions require some manual labor to get it working.

----------------------------------------------------
CT file download
----------------------------------------------------

https://gist.github.com/MarkusMaal/bc9b2d7497d67cb1a17e1ad1d61ca0eb/raw/9b3679e61b9aeacc02fc69ffa725bb57f1e0ee11/FlipnicFreecam-public.CT (right click → save as)

----------------------------------------------------
Using Cheat Engine with PCSX2 2.x
----------------------------------------------------

To use Cheat Engine with PCSX2 2.x, you need to enable this setting:

Edit → Settings → Scan Settings → Scan the following memory region types → MEM_MAPPED

Otherwise, it'll just ignore the PS2 EE memory region.

----------------------------------------------------
Using the CT file
----------------------------------------------------

To load the CT file, choose File → Load in Cheat Engine. Find the file with file browser and open it. Allow it to execute the lua script. Now hook Cheat Engine to PCSX2 with the game already running and keep the address list. You should now see the EEmemPointer has an address - do not remove it!

To see the form, double-click Table → FlipnicFreecam. You should see a window open, resize it. Now, in-game, go into a stage and let your ball drop into the outhole (don't relaunch it). Now you have the conditions to control the camera without interruptions.

----------------------------------------------------
Troubleshooting
----------------------------------------------------

Switch back to Flipnic Freecam window and click the "Freecam enable" button. For testing, drag the "Field of view" slider and you should see the FOV change. If you don't see anything change or the game crashes, that means it isn't the PAL version and you need to modify the script to get it to work (for safety reasons, if it didn't crash, restart the game without saving).

To see the code, click Table → Show Cheat Table Lua Script. You want to specifically modify the local camLoc variable. Perform the following steps to get the offset:

1. Load the Metallurgy A stage (a 5-minute demo of this stage is immediately accessible even if you don't have a completed save file). You can press START to pause the timer if you only have access to the demo.
2. Let the animation play
3. Using Cheat Engine or PCSX2 debug tools, search for this array of bytes in memory: 4A F0 40 44 00 00 D0 41 BA 18 1D 44 00 00 80 3F 4A 30 47 44 FC FF FF 3F BA D8 16 44 00 00 80 3F 00 00 00 00 00 00 00 00
4. It should return 1 result. If you're using CE, you can set the start to eemem or pcsx2-qt.eemem in memory scan options to ensure only 1 value is returned.
5. Add 0x30 to the address where you found these bytes
6. If you used CE, you also need to also subtract the address of EEmemPointer to get the actual offset in PS2 memory
7. Take the resulting offset and set the camLoc variable to it (hexadecimal values are prefixed with 0x)
8. Save the script and click the "Execute script" button to apply changes immediately

----------------------------------------------------
How to use Flipnic Freecam form
----------------------------------------------------
There are three columns that you can mess with:

- Origin+Target - moves both the target and origin, so that you can just move around without changing the angle
- Target - moves the "imaginary point", which the camera looks at
- Origin - moves the actual camera position without moving the target

Also

- Freecam enable - Enable Freecam mode (doesn't work when multiball mission is active or in evolution stages)
- Freecam disable - Resets the camera to whatever it was

There are also three sliders

- Field of view - Adjusts FOV, smaller values zoom the camera out, while higher values make everything smaller and more distorted
- Substep - Each time you click a + or - button, move the camera by this much
- Step - Same as substep, but allows you to move even faster

Obviously you can click on the - and + buttons, but you can also scroll the mouse wheel on the - buttons to change that specific value.


----------------------------------------------------
Chapters
----------------------------------------------------
0:00 Biology
9:57 Metallurgy
21:33 Optics
37:09 Biology 2P
42:08 Metallurgy 2P
45:00 Geometry
57:56 Optics 2P
59:01 Geometry 2P

----------------------------------------------------
In case you use macOS
----------------------------------------------------

You need to temporarily disable System Integrity Protection to use Cheat Engine on a Mac. Follow Apple's instructions here: https://developer.apple.com/documentation/security/disabling-and-enabling-system-integrity-protection.
In this video, I showcase various areas of the game you normally don't see thanks to a freecam mod I made with Cheat Engine. It's ready to use if you have the PAL version, but other versions require some manual labor to get it working.

----------------------------------------------------
CT file download
----------------------------------------------------

https://gist.github.com/MarkusMaal/bc9b2d7497d67cb1a17e1ad1d61ca0eb/raw/9b3679e61b9aeacc02fc69ffa725bb57f1e0ee11/FlipnicFreecam-public.CT (right click → save as)

----------------------------------------------------
Using Cheat Engine with PCSX2 2.x
----------------------------------------------------

To use Cheat Engine with PCSX2 2.x, you need to enable this setting:

Edit → Settings → Scan Settings → Scan the following memory region types → MEM_MAPPED

Otherwise, it'll just ignore the PS2 EE memory region.

----------------------------------------------------
Using the CT file
----------------------------------------------------

To load the CT file, choose File → Load in Cheat Engine. Find the file with file browser and open it. Allow it to execute the lua script. Now hook Cheat Engine to PCSX2 with the game already running and keep the address list. You should now see the EEmemPointer has an address - do not remove it!

To see the form, double-click Table → FlipnicFreecam. You should see a window open, resize it. Now, in-game, go into a stage and let your ball drop into the outhole (don't relaunch it). Now you have the conditions to control the camera without interruptions.

----------------------------------------------------
Troubleshooting
----------------------------------------------------

Switch back to Flipnic Freecam window and click the "Freecam enable" button. For testing, drag the "Field of view" slider and you should see the FOV change. If you don't see anything change or the game crashes, that means it isn't the PAL version and you need to modify the script to get it to work (for safety reasons, if it didn't crash, restart the game without saving).

To see the code, click Table → Show Cheat Table Lua Script. You want to specifically modify the local camLoc variable. Perform the following steps to get the offset:

1. Load the Metallurgy A stage (a 5-minute demo of this stage is immediately accessible even if you don't have a completed save file). You can press START to pause the timer if you only have access to the demo.
2. Let the animation play
3. Using Cheat Engine or PCSX2 debug tools, search for this array of bytes in memory: 4A F0 40 44 00 00 D0 41 BA 18 1D 44 00 00 80 3F 4A 30 47 44 FC FF FF 3F BA D8 16 44 00 00 80 3F 00 00 00 00 00 00 00 00
4. It should return 1 result. If you're using CE, you can set the start to eemem or pcsx2-qt.eemem in memory scan options to ensure only 1 value is returned.
5. Add 0x30 to the address where you found these bytes
6. If you used CE, you also need to also subtract the address of EEmemPointer to get the actual offset in PS2 memory
7. Take the resulting offset and set the camLoc variable to it (hexadecimal values are prefixed with 0x)
8. Save the script and click the "Execute script" button to apply changes immediately

----------------------------------------------------
How to use Flipnic Freecam form
----------------------------------------------------
There are three columns that you can mess with:

- Origin+Target - moves both the target and origin, so that you can just move around without changing the angle
- Target - moves the "imaginary point", which the camera looks at
- Origin - moves the actual camera position without moving the target

Also

- Freecam enable - Enable Freecam mode (doesn't work when multiball mission is active or in evolution stages)
- Freecam disable - Resets the camera to whatever it was

There are also three sliders

- Field of view - Adjusts FOV, smaller values zoom the camera out, while higher values make everything smaller and more distorted
- Substep - Each time you click a + or - button, move the camera by this much
- Step - Same as substep, but allows you to move even faster

Obviously you can click on the - and + buttons, but you can also scroll the mouse wheel on the - buttons to change that specific value.


----------------------------------------------------
Chapters
----------------------------------------------------
0:00 Biology
9:57 Metallurgy
21:33 Optics
37:09 Biology 2P
42:08 Metallurgy 2P
45:00 Geometry
57:56 Optics 2P
59:01 Geometry 2P

----------------------------------------------------
In case you use macOS
----------------------------------------------------

You need to temporarily disable System Integrity Protection to use Cheat Engine on a Mac. Follow Apple's instructions here: https://developer.apple.com/documentation/security/disabling-and-enabling-system-integrity-protection.
FlipnicFreecam.mp4 Videomängude analüüs Video game analysis free camera,freecam,mod,cheat,Cheat Engine,PCSX2,2.0,Flipnic,Flipnic: Ultimate Pinball,Flipnic research,Optics,Biology,Geometry,Metallurgy,2 player,PlayStation 2 N/A Press any key to continue... Press any key to continue... 0 /channel_db_lite/web/thumbs/636.jpg N/A N/A N/A N/A
537 Press any key to continue... Flipnic - Full soundtrack [BGM] 0 2023-04-23 There are already some uploads of the soundtrack for this game, but they're incomplete and missing tracks. This one should include every single background music from Flipnic, which has a corresponding .MID, .BD and .HD file. The images are backgrounds used in certain menu screens.

I was able to record these soundtracks by muting the sound effects, then replacing a music track that was supposed to play with another one using Cheat Engine. Finally, I recorded all of the background music by setting the record source to loopback in Audacity and then exported each recording into a file.

Download: https://drive.google.com/drive/folders/1KFpF4nAqi68JKX4AmXRx5hiu29KSBjcV?usp=sharing

Timestamps:
------------ Biology ------------
0:00 Stage main (Biology) [NATURE_0.MID]
2:17 UFO warning [NATURE_1.MID]
3:44 Multiball [NATURE_2.MID]
4:43 Bonus missions [POSITIVE.MID]
--------- Metallurgy ----------
6:25 Stage main (Metallurgy) [ISEKI_0.MID]
8:55 Spider crab [ISEKI_1.MID]
10:17 Multiball/Shoot down the shafts [ISEKI_2.MID]
------------ Optics --------------
11:37 Stage main (Optics) [HIKARI_0.MID]
13:36 Non-stop area/Bumper village [HIKARI_1.MID]
15:05 Multiball/Loop the loop [HIKARI_2.MID]
---------- Evolution ------------
16:31 Stage main (Evolution) [BOSS_1.MID]
--------- Geometry ------------
18:14 Stage main (Geometry) [LOAD_RETRO_3.MID]
18:59 Chu chu multiball [LOAD_RETRO_4.MID]
19:29 Alien hill [LOAD_RETRO_5.MID]
20:08 Area 74 [LOAD_RETRO_6.MID]
20:51 Galaxy Tennis [LOAD_RETRO_7.MID]
--------- Incidentals ----------
21:46 Red mission [LOAD_0.MID]
21:50 Yellow mission [LOAD_1.MID]
21:56 Geometry mission 0 (unused ver.) [LOAD_RETRO_0.MID]
21:59 Geometry mission 1 [LOAD_RETRO_1.MID]
22:03 Geometry mission 2 [LOAD_RETRO_2.MID]
------- Miscellaneous --------
22:07 Zero gravity [SERIOUS.MID]
23:24 Geometry 2P [RETRO_0.MID]
24:43 Geometry 2P (unused ver.) [RETRO_1.MID]
25:44 Main menu [MENU_1.MID]
0 1 0 1 https://www.youtube.com/watch?v=9Hkis0fJdWc 0 Flipnic - Full soundtrack [BGM] . There are already some uploads of the soundtrack for this game, but they're incomplete and missing tracks. This one should include every single background music from Flipnic, which has a corresponding .MID, .BD and .HD file. The images are backgrounds used in certain menu screens.

I was able to record these soundtracks by muting the sound effects, then replacing a music track that was supposed to play with another one using Cheat Engine. Finally, I recorded all of the background music by setting the record source to loopback in Audacity and then exported each recording into a file.

Download: https://drive.google.com/drive/folders/1KFpF4nAqi68JKX4AmXRx5hiu29KSBjcV?usp=sharing

Timestamps:
------------ Biology ------------
0:00 Stage main (Biology) [NATURE_0.MID]
2:17 UFO warning [NATURE_1.MID]
3:44 Multiball [NATURE_2.MID]
4:43 Bonus missions [POSITIVE.MID]
--------- Metallurgy ----------
6:25 Stage main (Metallurgy) [ISEKI_0.MID]
8:55 Spider crab [ISEKI_1.MID]
10:17 Multiball/Shoot down the shafts [ISEKI_2.MID]
------------ Optics --------------
11:37 Stage main (Optics) [HIKARI_0.MID]
13:36 Non-stop area/Bumper village [HIKARI_1.MID]
15:05 Multiball/Loop the loop [HIKARI_2.MID]
---------- Evolution ------------
16:31 Stage main (Evolution) [BOSS_1.MID]
--------- Geometry ------------
18:14 Stage main (Geometry) [LOAD_RETRO_3.MID]
18:59 Chu chu multiball [LOAD_RETRO_4.MID]
19:29 Alien hill [LOAD_RETRO_5.MID]
20:08 Area 74 [LOAD_RETRO_6.MID]
20:51 Galaxy Tennis [LOAD_RETRO_7.MID]
--------- Incidentals ----------
21:46 Red mission [LOAD_0.MID]
21:50 Yellow mission [LOAD_1.MID]
21:56 Geometry mission 0 (unused ver.) [LOAD_RETRO_0.MID]
21:59 Geometry mission 1 [LOAD_RETRO_1.MID]
22:03 Geometry mission 2 [LOAD_RETRO_2.MID]
------- Miscellaneous --------
22:07 Zero gravity [SERIOUS.MID]
23:24 Geometry 2P [RETRO_0.MID]
24:43 Geometry 2P (unused ver.) [RETRO_1.MID]
25:44 Main menu [MENU_1.MID]
. flipnic_ost_full.mp4 Muusika Music Flipnic,bgm,background music,Ultimate Pinball,NATURE_0,NATURE_1,NATURE_2,POSITIVE,ISEKI_0,ISEKI_1,ISEKI_2,HIKARI_0,HIKARI_1,HIKARI_2,BOSS_1,LOAD_RETRO_3,LOAD_RETRO_4,LOAD_RETRO_5,LOAD_RETRO_6,LOAD_RETRO_7,LOAD_0,LOAD_1,LOAD_RETRO_0,LOAD_RETRO_1,LOAD_RETRO_2,SERIOUS,RETRO_0,RETRO_1,MENU_1,Menu theme,Biology,Metallurgy,Theology,Evolution,Optics,Geometry,Staff credits,stage music,original soundtrack,OST N/A Press any key to continue... Press any key to continue... 0 /channel_db_lite/web/thumbs/537.jpg N/A /channel_db_lite/web/json/537.json N/A N/A
531 Press any key to continue... Flipnic cutscenes be like... 0 2023-03-03 Every time you get a mission in Flipnic, you get a freaking cutscene. Becomes a bit funny at times. 0 1 0 1 https://www.youtube.com/watch?v=nuFz7J_RIWw 0 Flipnic cutscenes be like... . Every time you get a mission in Flipnic, you get a freaking cutscene. Becomes a bit funny at times. . Congratulations.mp4 Naljavideod Joke videos N/A Press any key to continue... Press any key to continue... 0 /channel_db_lite/web/thumbs/531.jpg N/A /channel_db_lite/web/json/531.json N/A N/A
510 Press any key to continue... Flipnic - Geometry A (Hard difficulty gameplay) [no sound] 0 2022-12-06 Since I haven't found a lot of good full stage playthrough videos on Flipnic, I've decided to upload some of my own gameplay!As a challenge for myself, I've also cranked up the difficulty to hard, which reduces the number of balls to three with no continues (unless you get extra credits and balls of course), all ball saving bumpers are deactivated by default, and the number of bumper hits required to complete specific missions has also been increased.

The Geometry stages provide a different type of gameplay with 2D-ish graphics, which is more similar to a brick breaker game, rather than a pinball game. Altough the video is shorter, this stage was actually more difficult than the Optics B stage for me.

I'm apologize for no sound in this video. I was recording this with OBS and during recording the audio level meter did show activity, so I have no idea why it decided not to output sound to the final file. I might upload a version with sound in the future, but for now I wanted to get the video out, so this will have to do.

At the minimum, to complete this stage, you have to do the following:1. Collect all purple keys
2. After collecting all the keys, you'll unlock the Space Warp mission, which lets you warp through the game field.
3. Warp 5 times to summon Area 74 flag, warp even more to summon the Alien Hill flag
4. We'll assume you hit the Area 74 flag first. In this mission, you must destroy the UFOs several times, while trying to avoid losing any balls.
5. If you hit the A-flag, you'll go to the Alien Hill mission. The goal here is to collect all blue keys and progress upwards until the counter reaches 0.
6. If you complete both Alien Hill and Area 74 missions, another flag, which is marked with E, appears. Collect it to start the Galaxy Tennis mission
7. (Optional) Try to hit your ball to the enemy position 3 times, while also defending your own position.
8. (Optional) You'll now be teleported back to spawn. You can now complete any leftover yellow missions that you hadn't completed before, which allows you to maximize the score, before playing the next stage (after quitting the stage, the score gets locked, meaning you won't get any more points)
0 1 0 1 https://www.youtube.com/watch?v=M7R03-vNb7s 0 Flipnic - Geometry A (Hard difficulty gameplay) [no sound] . Since I haven't found a lot of good full stage playthrough videos on Flipnic, I've decided to upload some of my own gameplay!As a challenge for myself, I've also cranked up the difficulty to hard, which reduces the number of balls to three with no continues (unless you get extra credits and balls of course), all ball saving bumpers are deactivated by default, and the number of bumper hits required to complete specific missions has also been increased.

The Geometry stages provide a different type of gameplay with 2D-ish graphics, which is more similar to a brick breaker game, rather than a pinball game. Altough the video is shorter, this stage was actually more difficult than the Optics B stage for me.

I'm apologize for no sound in this video. I was recording this with OBS and during recording the audio level meter did show activity, so I have no idea why it decided not to output sound to the final file. I might upload a version with sound in the future, but for now I wanted to get the video out, so this will have to do.

At the minimum, to complete this stage, you have to do the following:1. Collect all purple keys
2. After collecting all the keys, you'll unlock the Space Warp mission, which lets you warp through the game field.
3. Warp 5 times to summon Area 74 flag, warp even more to summon the Alien Hill flag
4. We'll assume you hit the Area 74 flag first. In this mission, you must destroy the UFOs several times, while trying to avoid losing any balls.
5. If you hit the A-flag, you'll go to the Alien Hill mission. The goal here is to collect all blue keys and progress upwards until the counter reaches 0.
6. If you complete both Alien Hill and Area 74 missions, another flag, which is marked with E, appears. Collect it to start the Galaxy Tennis mission
7. (Optional) Try to hit your ball to the enemy position 3 times, while also defending your own position.
8. (Optional) You'll now be teleported back to spawn. You can now complete any leftover yellow missions that you hadn't completed before, which allows you to maximize the score, before playing the next stage (after quitting the stage, the score gets locked, meaning you won't get any more points)
. 2022-12-06 21-42-10.mkv Muud mängimise videod Other gameplay videos N/A Press any key to continue... Press any key to continue... 0 /channel_db_lite/web/thumbs/510.jpg N/A /channel_db_lite/web/json/510.json N/A N/A
509 Press any key to continue... Flipnic - Optics B (Hard difficulty gameplay) 0 2022-12-04 Since I haven't found a lot of good full stage playthrough videos on Flipnic, I've decided to upload some of my own gameplay!

As a challenge for myself, I've also cranked up the difficulty to hard, which reduces the number of balls to three with no continues (unless you get extra credits and balls of course), all ball saving bumpers are deactivated by default, and the number of bumper hits required to complete specific missions has also been increased.

It took me a long time to upload the Optics B gameplay, because my initial victory didn't have sound, so I had to beat it again (and this stage is really difficult).

At the minimum, to complete this stage, you have to do the following:
1. Hit a flying target to trigger a "Point of No Return" mission
2. Collect all of the rings required, which have been placed all around the stage (some rings are only at specific areas, such as Yellow, Magenta, and Cyan)
3. Go back to the spawn location, a multiball mission will then start
4. (Optional) Complete a required task for the multiball mission
5. Repeat steps 1-4 two more times
6. After completing the third multiball mission, you'll be teleported to a Zero Gravity mission area
7. (Optional) Try to hit projectiles within the time limit. Second to last particle shape is a stick figure and the final one is a combination of all the previous shapes. If you manage to do this, you'll be awarded with a neat cake cutscene and a bunch of bonus points. If you don't, you'll just recieve no bonus and the cutscene won't play, but you'll still unlock the next stage
8. (Optional) You'll now be teleported back to spawn. You can now complete any leftover yellow missions that you hadn't completed before, which allows you to maximize the score, before playing the next stage (after quitting the stage, the score gets locked, meaning you won't get any more points)
0 1 0 1 https://www.youtube.com/watch?v=VahRvD_2iyY 0 Flipnic - Optics B (Hard difficulty gameplay) . Since I haven't found a lot of good full stage playthrough videos on Flipnic, I've decided to upload some of my own gameplay!

As a challenge for myself, I've also cranked up the difficulty to hard, which reduces the number of balls to three with no continues (unless you get extra credits and balls of course), all ball saving bumpers are deactivated by default, and the number of bumper hits required to complete specific missions has also been increased.

It took me a long time to upload the Optics B gameplay, because my initial victory didn't have sound, so I had to beat it again (and this stage is really difficult).

At the minimum, to complete this stage, you have to do the following:
1. Hit a flying target to trigger a "Point of No Return" mission
2. Collect all of the rings required, which have been placed all around the stage (some rings are only at specific areas, such as Yellow, Magenta, and Cyan)
3. Go back to the spawn location, a multiball mission will then start
4. (Optional) Complete a required task for the multiball mission
5. Repeat steps 1-4 two more times
6. After completing the third multiball mission, you'll be teleported to a Zero Gravity mission area
7. (Optional) Try to hit projectiles within the time limit. Second to last particle shape is a stick figure and the final one is a combination of all the previous shapes. If you manage to do this, you'll be awarded with a neat cake cutscene and a bunch of bonus points. If you don't, you'll just recieve no bonus and the cutscene won't play, but you'll still unlock the next stage
8. (Optional) You'll now be teleported back to spawn. You can now complete any leftover yellow missions that you hadn't completed before, which allows you to maximize the score, before playing the next stage (after quitting the stage, the score gets locked, meaning you won't get any more points)
. FlipnicOpticsBHard.mp4 Muud mängimise videod Other gameplay videos N/A Press any key to continue... Press any key to continue... 0 /channel_db_lite/web/thumbs/509.jpg N/A /channel_db_lite/web/json/509.json N/A N/A
474 Press any key to continue... Flipnic - Biology B (Hard difficulty gameplay) 0 2022-07-28 Since I haven't found a lot of good full stage playthrough videos on Flipnic, I've decided to upload some of my own gameplay!

As a challenge for myself, I've also cranked up the difficulty to hard, which reduces the number of balls to three with no continues (unless you get extra credits and balls of course), all ball saving bumpers are deactivated by default, and the number of bumper hits required to complete specific missions has also been increased.

This time I'm playing the very first B-version of a stage in this game - Biology B. These secondary versions are mirrored and have modified textures and color pallettes. You need to complete these B-versions before unlocking the final stage, which is Geometry A.

At the minimum, to complete this stage, you have to do the following:
1. Get to the "Slot chance" area
2. Go to the right lane
3. Once you get to the middle section with the flipper, you need to aim for the lane on the left
4. Hit bumpers, until all of them have butterflies. This will complete the "Freeze Over" mission
5. Go back to the "Slot chance" area. You should now see 2 platforms. Try to make the ball jump over these ramps a certain number of times. If the counter reaches 0, the "Hidden path discovery" will start
6. Go up the mountain and collect all of the shiny coins. Once you reach the very top, the "Zero Gravity" mission will start.
7. (Optional) Try to hit projectiles within the time limit. Second to last particle shape is a stick figure and the final one is a combination of all the previous shapes. If you manage to do this, you'll be awarded with a neat cake cutscene and a bunch of bonus points. If you don't, you'll just recieve no bonus and the cutscene won't play, but you'll still unlock the next stage
8. (Optional) You'll now be teleported back to spawn. You can now complete any leftover yellow missions that you hadn't completed before, which allows you to maximize the score, before playing the next stage (after quitting the stage, the score gets locked, meaning you won't get any more points)
0 1 0 1 https://www.youtube.com/watch?v=cTGeJ3Yr3_c 0 . . Since I haven't found a lot of good full stage playthrough videos on Flipnic, I've decided to upload some of my own gameplay!

As a challenge for myself, I've also cranked up the difficulty to hard, which reduces the number of balls to three with no continues (unless you get extra credits and balls of course), all ball saving bumpers are deactivated by default, and the number of bumper hits required to complete specific missions has also been increased.

This time I'm playing the B-version of the Metallurgy stage. These secondary versions are mirrored and have modified textures and color pallettes. You need to complete these B-versions before unlocking the final stage, which is Geometry A.

At the minimum, to complete this stage, you have to do the following:
1. Go through the first lane after spawning on the stage
2. Take a color coded lane
3. If you chose the magenta lane, you'll end up in an area with a UFO trying to shoot lasers at you. Try to hit the purple circuit board certain number of times, which will complete the first "Move On" mission
4. Take the lane, which you just uncovered after completing this mission
5. You'll now be at another area. Try to hit another purple circuit board certain number of times, which will complete the second "Move On" mission
6. Take the lane, which you just uncovered
7. Go through the non-colorcoded lanes until you find a color-coded lane, which you haven't taken
8. If you chose the green lane, you'll end up in the air spinning around cylinders. If you press circle, you'll move forward in that direction
9. Take a specific path until you get to an area with four shafts. Hit one shaft while it's active to start a "Shut Down the Shafts" mission
10. Shut down all shafts within the time limit
11. Repeat steps 9-10
12. You can go back to the lane selection area if you go through a portal
13. Repeat step 7
14. If you chose the blue lane, you'll end up in another area, where a giant spider crab mini-boss spawns. If you hit the spider crab with the ball, you'll remove some of its health. Try to do this until the spider crab explodes. Then you can take a specific lane to go back
15. Take the non-colorcoded lanes until you get back to the spawn area.
16. Take the white lane, that was previously covered by a pillar before. This will start he "Zero gravity" mission
17. (Optional) Try to hit projectiles within the time limit. Second to last particle shape is a stick figure and the final one is a combination of all the previous shapes. If you manage to do this, you'll be awarded with a neat cake cutscene and a bunch of bonus points. If you don't, you'll just recieve no bonus and the cutscene won't play, but you'll still unlock the next stage
18. (Optional) You'll now be teleported back to spawn. You can now complete any leftover yellow missions that you hadn't completed before, which allows you to maximize the score, before playing the next stage (after quitting the stage, the score gets locked, meaning you won't get any more points)

P.S. I already finished the Optics B stage, but due to some garbage with pulseaudio, the recording was missing audio, which is really annoying. This means that it'll take some time before I can upload a finished Optics B run :(
. MetallurgyB_hard.mp4 Muud mängimise videod Other gameplay videos N/A Press any key to continue... Press any key to continue... 1 /channel_db_lite/web/thumbs/474.jpg N/A /channel_db_lite/web/json/474.json N/A N/A
467 Press any key to continue... Flipnic - Metallurgy A (Hard difficulty gameplay) 0 2022-07-25 Since I haven't found a lot of good full stage playthrough videos on Flipnic, I've decided to upload some of my own gameplay!

As a challenge for myself, I've also cranked up the difficulty to hard, which reduces the number of balls to three with no continues (unless you get extra credits and balls of course), all ball saving bumpers are deactivated by default, and the number of bumper hits required to complete specific missions has also been increased.

This time it's Metallurgy A, which is unlocked after defeating the first boss.

At the minimum, to complete this stage, you have to do the following:
1. Go through the first lane after spawning on the stage
2. Take a color coded lane
3. If you chose the magenta lane, you'll end up in an area with a UFO trying to shoot lasers at you. Try to hit the purple circuit board certain number of times, which will complete the first "Move On" mission
4. Take the lane, which you just uncovered after completing this mission
5. You'll now be at another area. Try to hit another purple circuit board certain number of times, which will complete the second "Move On" mission
6. Take the lane, which you just uncovered
7. Go through the non-colorcoded lanes until you find a color-coded lane, which you haven't taken
8. If you chose the green lane, you'll end up in the air spinning around cylinders. If you press circle, you'll move forward in that direction
9. Take a specific path until you get to an area with four shafts. Hit one shaft while it's active to start a "Shut Down the Shafts" mission
10. Shut down all shafts within the time limit
11. Repeat steps 9-10
12. You can go back to the lane selection area if you go through a portal
13. Repeat step 7
14. If you chose the blue lane, you'll end up in another area, where a giant spider crab mini-boss spawns. If you hit the spider crab with the ball, you'll remove some of its health. Try to do this until the spider crab explodes. Then you can take a specific lane to go back
15. Take the non-colorcoded lanes until you get back to the spawn area.
16. Take the white lane, that was previously covered by a pillar before. This will start he "Zero gravity" mission
17. (Optional) Try to hit projectiles within the time limit. Second to last particle shape is a stick figure and the final one is a combination of all the previous shapes. If you manage to do this, you'll be awarded with a neat cake cutscene and a bunch of bonus points. If you don't, you'll just recieve no bonus and the cutscene won't play, but you'll still unlock the next stage
18. (Optional) You'll now be teleported back to spawn. You can now complete any leftover yellow missions that you hadn't completed before, which allows you to maximize the score, before playing the next stage (after quitting the stage, the score gets locked, meaning you won't get any more points)
0 1 0 1 https://www.youtube.com/watch?v=pftgH8DNink 0 . . Since I haven't found a lot of good full stage playthrough videos on Flipnic, I've decided to upload some of my own gameplay!

As a challenge for myself, I've also cranked up the difficulty to hard, which reduces the number of balls to three with no continues (unless you get extra credits and balls of course), all ball saving bumpers are deactivated by default, and the number of bumper hits required to complete specific missions has also been increased.

This time it's Metallurgy A, which is unlocked after defeating the first boss.

At the minimum, to complete this stage, you have to do the following:
1. Go through the first lane after spawning on the stage
2. Take a color coded lane
3. If you chose the magenta lane, you'll end up in an area with a UFO trying to shoot lasers at you. Try to hit the purple circuit board certain number of times, which will complete the first "Move On" mission
4. Take the lane, which you just uncovered after completing this mission
5. You'll now be at another area. Try to hit another purple circuit board certain number of times, which will complete the second "Move On" mission
6. Take the lane, which you just uncovered
7. Go through the non-colorcoded lanes until you find a color-coded lane, which you haven't taken
8. If you chose the green lane, you'll end up in the air spinning around cylinders. If you press circle, you'll move forward in that direction
9. Take a specific path until you get to an area with four shafts. Hit one shaft while it's active to start a "Shut Down the Shafts" mission
10. Shut down all shafts within the time limit
11. Repeat steps 9-10
12. You can go back to the lane selection area if you go through a portal
13. Repeat step 7
14. If you chose the blue lane, you'll end up in another area, where a giant spider crab mini-boss spawns. If you hit the spider crab with the ball, you'll remove some of its health. Try to do this until the spider crab explodes. Then you can take a specific lane to go back
15. Take the non-colorcoded lanes until you get back to the spawn area.
16. Take the white lane, that was previously covered by a pillar before. This will start he "Zero gravity" mission
17. (Optional) Try to hit projectiles within the time limit. Second to last particle shape is a stick figure and the final one is a combination of all the previous shapes. If you manage to do this, you'll be awarded with a neat cake cutscene and a bunch of bonus points. If you don't, you'll just recieve no bonus and the cutscene won't play, but you'll still unlock the next stage
18. (Optional) You'll now be teleported back to spawn. You can now complete any leftover yellow missions that you hadn't completed before, which allows you to maximize the score, before playing the next stage (after quitting the stage, the score gets locked, meaning you won't get any more points)
. MetallurgyA_hard.mp4 Teised skriptimiskeeled Other gameplay videos N/A Press any key to continue... Press any key to continue... 1 /channel_db_lite/web/thumbs/467.jpg N/A /channel_db_lite/web/json/467.json N/A N/A
468 Press any key to continue... Flipnic - Biology A (Hard difficulty gameplay) 0 2022-07-25 Since I haven't found a lot of good full stage playthrough videos on Flipnic, I've decided to upload some of my own gameplay!

As a challenge for myself, I've also cranked up the difficulty to hard, which reduces the number of balls to three with no continues (unless you get extra credits and balls of course), all ball saving bumpers are deactivated by default, and the number of bumper hits required to complete specific missions has also been increased.

This time I'm playing the very first stage in this game - Biology A. It also has a little introduction sequence, which other stages don't have.

At the minimum, to complete this stage, you have to do the following:
1. Get to the "Slot chance" area
2. Go to the left lane
3. Once you get to the middle section with the flipper, you need to aim for the lane on the right
4. Hit bumpers, until all of them have butterflies. This will complete the "Freeze Over" mission
5. Go back to the "Slot chance" area. You should now see 2 platforms. Try to make the ball jump over these ramps a certain number of times. If the counter reaches 0, the "Hidden path discovery" will start
6. Go up the mountain and collect all of the shiny coins. Once you reach the very top, the "Zero Gravity" mission will start.
7. (Optional) Try to hit projectiles within the time limit. Second to last particle shape is a stick figure and the final one is a combination of all the previous shapes. If you manage to do this, you'll be awarded with a neat cake cutscene and a bunch of bonus points. If you don't, you'll just recieve no bonus and the cutscene won't play, but you'll still unlock the next stage
8. (Optional) You'll now be teleported back to spawn. You can now complete any leftover yellow missions that you hadn't completed before, which allows you to maximize the score, before playing the next stage (after quitting the stage, the score gets locked, meaning you won't get any more points)
0 1 0 1 https://www.youtube.com/watch?v=wwQiDW8WaDA 0 . . Since I haven't found a lot of good full stage playthrough videos on Flipnic, I've decided to upload some of my own gameplay!

As a challenge for myself, I've also cranked up the difficulty to hard, which reduces the number of balls to three with no continues (unless you get extra credits and balls of course), all ball saving bumpers are deactivated by default, and the number of bumper hits required to complete specific missions has also been increased.

This time I'm playing the very first stage in this game - Biology A. It also has a little introduction sequence, which other stages don't have.

At the minimum, to complete this stage, you have to do the following:
1. Get to the "Slot chance" area
2. Go to the left lane
3. Once you get to the middle section with the flipper, you need to aim for the lane on the right
4. Hit bumpers, until all of them have butterflies. This will complete the "Freeze Over" mission
5. Go back to the "Slot chance" area. You should now see 2 platforms. Try to make the ball jump over these ramps a certain number of times. If the counter reaches 0, the "Hidden path discovery" will start
6. Go up the mountain and collect all of the shiny coins. Once you reach the very top, the "Zero Gravity" mission will start.
7. (Optional) Try to hit projectiles within the time limit. Second to last particle shape is a stick figure and the final one is a combination of all the previous shapes. If you manage to do this, you'll be awarded with a neat cake cutscene and a bunch of bonus points. If you don't, you'll just recieve no bonus and the cutscene won't play, but you'll still unlock the next stage
8. (Optional) You'll now be teleported back to spawn. You can now complete any leftover yellow missions that you hadn't completed before, which allows you to maximize the score, before playing the next stage (after quitting the stage, the score gets locked, meaning you won't get any more points)
. BiologyA_hard.mp4 Muud mängimise videod Other gameplay videos N/A Press any key to continue... Press any key to continue... 1 /channel_db_lite/web/thumbs/468.jpg N/A /channel_db_lite/web/json/468.json N/A N/A
463 Press any key to continue... Flipnic - Optics A (Hard difficulty gameplay) 0 2022-07-24 Since I haven't found a lot of good full stage playthrough videos on Flipnic, I've decided to upload some of my own gameplay!

As a challenge for myself, I've also cranked up the difficulty to hard, which reduces the number of balls to three with no continues (unless you get extra credits and balls of course), all ball saving bumpers are deactivated by default, and the number of bumper hits required to complete specific missions has also been increased.

I've decided to go with Optics A first, because it's my favorite stage in this game and I've praticed a lot on it.

At the minimum, to complete this stage, you have to do the following:
1. Hit a flying target to trigger a "Point of No Return" mission
2. Collect all of the rings required, which have been placed all around the stage (some rings are only at specific areas, such as Yellow, Magenta, and Cyan)
3. Go back to the spawn location, a multiball mission will then start
4. (Optional) Complete a required task for the multiball mission
5. Repeat steps 1-4 two more times
6. After completing the third multiball mission, you'll be teleported to a Zero Gravity mission area
7. (Optional) Try to hit projectiles within the time limit. Second to last particle shape is a stick figure and the final one is a combination of all the previous shapes. If you manage to do this, you'll be awarded with a neat cake cutscene and a bunch of bonus points. If you don't, you'll just recieve no bonus and the cutscene won't play, but you'll still unlock the next stage
8. (Optional) You'll now be teleported back to spawn. You can now complete any leftover yellow missions that you hadn't completed before, which allows you to maximize the score, before playing the next stage (after quitting the stage, the score gets locked, meaning you won't get any more points)
0 1 0 1 https://www.youtube.com/watch?v=XudtUvFv-r8 0 . . Since I haven't found a lot of good full stage playthrough videos on Flipnic, I've decided to upload some of my own gameplay!

As a challenge for myself, I've also cranked up the difficulty to hard, which reduces the number of balls to three with no continues (unless you get extra credits and balls of course), all ball saving bumpers are deactivated by default, and the number of bumper hits required to complete specific missions has also been increased.

I've decided to go with Optics A first, because it's my favorite stage in this game and I've praticed a lot on it.

At the minimum, to complete this stage, you have to do the following:
1. Hit a flying target to trigger a "Point of No Return" mission
2. Collect all of the rings required, which have been placed all around the stage (some rings are only at specific areas, such as Yellow, Magenta, and Cyan)
3. Go back to the spawn location, a multiball mission will then start
4. (Optional) Complete a required task for the multiball mission
5. Repeat steps 1-4 two more times
6. After completing the third multiball mission, you'll be teleported to a Zero Gravity mission area
7. (Optional) Try to hit projectiles within the time limit. Second to last particle shape is a stick figure and the final one is a combination of all the previous shapes. If you manage to do this, you'll be awarded with a neat cake cutscene and a bunch of bonus points. If you don't, you'll just recieve no bonus and the cutscene won't play, but you'll still unlock the next stage
8. (Optional) You'll now be teleported back to spawn. You can now complete any leftover yellow missions that you hadn't completed before, which allows you to maximize the score, before playing the next stage (after quitting the stage, the score gets locked, meaning you won't get any more points)
. OpticsA_hard.mp4 Muud mängimise videod Other gameplay videos N/A Press any key to continue... Press any key to continue... 1 /channel_db_lite/web/thumbs/463.jpg N/A /channel_db_lite/web/json/463.json N/A N/A
312 Press any key to continue... Flipnic: In-game help 0 2020-06-15 These are help videos you can find in Flipnic (PS2), when you go to the Help menu. These explain basic mechnics of the game, as well as some more advanced techniques. I like these more than the actual manual included in the case, because of the nice visuals and more detailed explanations. 0 1 0 0 https://www.youtube.com/watch?v=374kqzSBuOA 0 . . These are help videos you can find in Flipnic (PS2), when you go to the Help menu. These videos are from the PAL version, but the NTSC-U has identical videos. The NTSC-J has similar videos, but they are in Japanese (obviously) and are actually placed in the Explain menu.

These videos explain basic mechnics of the game, as well as some more advanced techniques. I like these more than the actual manual included in the case, because of the nice visuals and more detailed explanations.

This video was originally uploaded a few months ago, but due to the fact I didn't verify my account using my phone, I wasn't able to upload it (longer than 15 minutes). And yes, I published 5 videos in a single day (altough 3 of them were unlisted already and uploaded a few months ago).

Timestamps:
0:00 Basic rules
3:20 Missions
7:14 Recovery 1
11:19 Recovery 2
14:02 Multiball
19:14 Defence & offence
22:46 Holding
. flipnic_help.wmv FMV klipid FMV clips Flipnic,pinball,simulator,physics,dynamics,advanced techniques,video game,in-game help,tictactoe,metallic ball,flipper,bumper,gravity,tilting,nudging,algebra,PlayStation,gaming,PS2,Sony Computer Entertainment Europe,coins,arcade,game tutorial,game console,video game console,outhole,bluecoins,red,yellow,mission https://odysee.com/@Press_any_key_to_continue:2/FlipnicHelp:e Press any key to continue... Press any key to continue... 1 /channel_db_lite/web/thumbs/312.jpg N/A /channel_db_lite/web/json/312.json N/A N/A